Trolleys, Beam & Lifting Clamps
| Lifting Clamps | Beam Clamps | Trolleys |
|
Lifting Clamps - are specialized tools. With hundreds of different models and types and manufacturers available it would be impossible in this catalog to even list them all. However, to achieve maximum clamp life and to help avoid accidents please observe the following precautions
For purposes of the catalog we have selected a "UNIVERSAL" clamp for lifting, turning (180°) and vertical transfer of steel plates and constructions. The hinged hoisting eye allows the user to place and lift the load from virtually any direction. They are intended for industrial use only and should not lift, support or otherwise transport people. |
 |
| Capacity in Tons | Model | Jaw Aperature, In. | Weight Each, Lbs. |
| 3/4 | IP-51 | 0 - 5/8 | 4 |
| 1 - 1/2 | IP-52 | 5/8 - 1-1/4 | 4 |
| IP-53 | 0 - 3/4 | 17 | |
| IP-54 | 3/4 - 1-5/8 | 17 | |
| 3 | IP-55 | 0 - 1 | 35 |
| IP-56 | 1 - 2 | 36 | |
| 4-1/2 | IP-57 | 0 - 1 | 35 |
| IP-58 | 1 - 2 | 37 | |
| 6 | IP-39 | 0 - 1-1/4 | 50 |
| IP-40 | 1-1/4 - 2-1/2 | 51 | |
| 9 | IP-41 | 0 - 1-5/8 | 63 |
| IP-41 | 1-5/8 - 1-3/8 | 64 | |
| 12 | IP-78 | 0 - 2-1/8 | 126 |
| IP-79 | 2-1/8 - 4-1/4 | 130 |
|
DO NOT EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH. |
|
Beam Clamps - rated from 1 - 5 tons INDUSCO beam clamps have specially designed clamp jaws that reduce stress by distributing load away from flange edge. The threaded adjustment mechanism fits securely on a wide range of flange widths and beams. They can be permanent or temporary and provide lower headroom with the built in suspension bar. They are intended for industrial use only and should not lift, support or otherwise transport people. |
|
 |
|
| Model | Rated Laod (Lbs.) | Flange Width (In.) | A Max. | B | C (In.) | D (In.) | E (In.) | F | G (In.) | H | Net Weight (Lbs.) | ||
| Min. | Max. | Min. | Max. | ||||||||||
| BC-1 | 2000 | 3-9 | 10.6 | 6.9 | 14.4 | 2.9 | 0.2 | 8.4 | 5.4 | 2.9 | 1.2 | .80 | 8.8 |
| BC-2 | 4000 | 3-9 | 10.6 | 7.3 | 15.0 | 2.9 | 0.2 | 8.4 | 5.4 | 2.9 | 1.2 | .80 | 13.2 |
| BC-3 | 6000 | 3.9-9 | 11.6 | 8.7 | 16.7 | 4.0 | 0.3 | 10.0 | 6.3 | 4.1 | 2.4 | .87 | 17.6 |
| BC-5 | 10000 | 3.9-10.2 | 12.6 | 9.8 | 18.7 | 4.0 | 0.3 | 10.0 | 6.3 | 3.5 | 1.8 | 1.10 | 22.0 |
|
DO NOT EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH. |
|
Trolleys - rated from ¼-5 tons INDUSCO trolleys provide an economical means to increase the efficiency in your work area. The wrap-around side plates act in a dual purpose role: as safety lugs to prevent dropping of load and protecting the trolley wheels, as well. They are adjustable, rugged, and low maintenance. They are intended for industrial use only and should not lift, support, or otherwise transport people. |
 |
| Model Number | Capacity (Ton) | Beam Height (In.) | Flange Width (In.) | Minimum Radius Curve (In.) | Wheel (In.) | Shipping Weight (Lbs.) |
| LMTC-500 | 1/4 | 4-10 | 2.66 - 4.66 | 36 | 2-1/4 | 14 |
| LMTC-1000 | 1/2 | 4-10 | 2.66 - 4.66 | 36 | 2-1/4 | 14 |
| LMTC-2000 | 1 | 5 - 12 | 3.00 - 5.00 | 48 | 2-3/4 | 23 |
| LMTC-3000 | 1-1/2 | 6 - 18 | 3.33 - 6.00 | 60 | 4-1/4 | 52 |
| LMTC-4000 | 2 | 6 - 18 | 3.33 - 6.00 | 60 | 4-1/4 | 52 |
| LMTC-6000 | 3 | 8 - 20 | 4.00 - 6.25 | 60 | 4-1/4 | 60 |
| LMTC-10000 | 5 | 10 - 24 | 4.66 - 7.00 | 60 | 3-3/8 | 96 |
|
DO NOT EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH. |
