Screw Eyebolts, Safeline Clamps, Locknuts, Eyenuts, Splicing Tools

Screw Eyebolts Safeline Clamps Locknuts Eyenuts Splicing Tools

Screw Eyebolts

Hot Dip Galvanized, Forged Steel

Shank Diameter and Length (In.) Eye Dim Weight Per 100 (Lbs.)
Shoulder
I.D. (In.) O.D. (In.) Shoulder
1/4 x 2 1/2 7/8 4.25
5/16 x 2-1/4 5/8 1-1/8 6.25
3/8 x 2-1/2 3/4 1-3/8 18.75
1/2 x 3-1/4 1 1-3/4 37.50
5/8 x 4 1-1/4 2-1/4 68.75

Top Of Page

DO NOT EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH.

Safe-Line® Clamps

*Safe-Line clamps are intended for use only on 6x19 IWRC or 7x19 wire rope regular-lay.
CAUTION - Never Use This Product On Synthetic Or Natural Fiber Ropes.

Size Recommended Torque To Assemble* (Ft. Lbs.) Weight Each
1/8 35 .13
3/16 80 .25
1/4 145 .32
5/16 225 .63
3/8 325 .81
1/2 575 1.2
5/8 900 3.0
3/4 1300 5.3
  • Labor Saving - 1 clamp can replace using multiple wire rope clips on each end.
  • Can be Field Assembled.
  • Encloses Wire Ends with Tapered Shape.
  • Thimble not included.

*Consult Manufacturers recommendations for proper assembly.

Top Of Page

DO NOT EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH.

Eye Nuts

Forged Steel - Galvanized - Threaded
Performs best with zinc plated rod.

Size No. Std. Tap M Dimensions In Inches Max Tap Size Possible Weight Pounds Each Working Load Limit* (Lbs.)
A C D E F S T
1 1/4 1-1/4 3/4 1-1/16 21/32 1/2 1/4 1-11/16 3/8 .1 520
1A 5/16 1-1/4 3/4 1-1/16 21/32 1/2 1/4 1-11/16 3/8 .1 850
2 3/8 1-5/8 1 1-1/4 3/4 9/16 5/16 2-1/16 7/16 .2 1250
3 7/16 2 1-1/4 1-1/2 1 13/16 3/8 2-1/2 1/2 .31 1700
3A 1/2 2 1-1/4 1-1/2 1 13/16 3/8 2-1/2 - .31 2250
4 5/8 2-1/2 1-1/2 2 1-3/16 1 1/2 3-3/16 3/4 .55 3600
5 3/4 3 1-3/4 2-3/8 1-3/8 1-1/8 5/8 3-7/8 7/8 1 5200
6 7/8 3-1/2 2 2-5/8 1-5/8 1-5/16 3/4 4-5/16 1 1.55 7200
7 1 4 2-1/4 3-1/16 1-7/8 1-9/16 7/8 5 1-1/4 2.45 10000
7A 1-1/8 4 2-1/4 3-1/16 1-7/8 1-9/16 7/8 5 1-1/4 2.45 12300
8 1-1/4 4-1/2 2-1/2 3-1/2 1-15/16 1-7/8 1 5-3/4 1-1/2 3.75 15500
9 1-3/8 5 2-3/4 3-3/4 2 2 1-1/8 6-1/4 1-1/2 5 18500
10 1-1/2 5-5/8 3-1/2 4 2-3/8 2-1/4 1-1/4 6-3/4 1-3/4 6.75 22500

Top Of Page

DO NOT EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH.

Locknuts



For Galvanized Turnbuckles.
Sold in pairs only, 1ea. R.H.,
1 ea. L.H. galvanized.
Size (In.) Thread Approx. Weight Each (Lbs.)
3/8 Left or Right .01
1/2 Left or Right .03
5/8 Left or Right .05
3/4 Left or Right .08
7/8 Left or Right .11
1 Left or Right .18
1-1/4 Left or Right .37
1-1/2 Left or Right .60
1-3/4 Left or Right 1.02
2 Left or Right 2.25
2-1/2 Left or Right 3.13
2-3/4 Left or Right 3.30

Top Of Page

DO NOT EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH.

 

Splicing Tools

Top Of Page

DO NOT EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH.
HOME
ABOUT
SERVICES
PRODUCTS


1200 W. Hamburg Street
Baltimore, Maryland 21230
Ph 410-727-0665 · Fax 410-727-2538
Toll Free 800-727-0665 · Toll Free Fax 800-666-0757