Galvanized - Improved Plow Steel - 6x19 Galvanized

Meets Design Requirements According to Federal Specification RRW-41OD
Diameter Inches Galvanized - Improved Plow Steel Diameter Inches
Fiber Core IWRC
Approx. Weight Per Foot Pounds Minimum Breaking Strength Net Tons Approx. Weight per Foot Pounds Minimum Breaking Strength Net Tons
1/4 .105 2.74 .116 2.65 1/4
5/16 .164 3.83 .180 4.12 5/16
3/8 .236 5.49 .26 4.9 3/8
7/16 .32 7.44 .35 8.0 7/17
1/2 .42 9.63 .46 10.3 1/2
9/16 .53 12.1 .59 13.0 9/16
5/8 .66 15.0 .72 16.1 5/8
3/4 .95 21.4 1.04 23.0 3/4
7/8 1.29 29.0 1.42 31.1 7/8
1 1.68 37.6 1.85 40.4 1
1-1/8 2.13 47.3 2.34 50.9 1-1/8
1-1/4 2.63 58.1 2.89 62.5 1-1/4
1-3/8 3.18 69.9 3.50 75.1 1-3/8
1-1/2 3.78 82.8 4.16 89.0 1-1/2
1-5/8 4.44 96.3 4.88 103.5 1-5/8
1-3/4 5.15 112.0 5.67 119.9 1-3/4
2 6.72 144.0 7.39 154.8 2
2-1/4 8.51 180.0 9.36 193.5 2-1/4
2-1/2 10.5 220.0 11.6 236.0 2-1/2
2-3/4 12.7 263.0 14.0 282.5 2-3/4

General Usage:
6x19 Galvanized
Approximately the same general application as 6x19 bright, but where extra resistance to corrosion is required. Continuous bending around sheaves and drums should be avoided. Examples: Shroud lines for the marine industry.

DO NOT EXCEED WORK LOAD LIMIT OR 20% OF THE PRODUCT'S BREAK STRENGTH.
HOME
ABOUT
SERVICES
PRODUCTS


1200 W. Hamburg Street
Baltimore, Maryland 21230
Ph 410-727-0665 · Fax 410-727-2538
Toll Free 800-727-0665 · Toll Free Fax 800-666-0757